Free Shipping over X amount

GRS GraverMax G8 Pneumatic Engraving System

GRS GraverMax G8 Pneumatic Engraving System

Item #
Save Favorite

When used with your compressed air source, the GraverMax G8 is an easy-to-use system that enables you to engrave, set stones, carve, sculpt, and decorate metal, wood, leather, ivory, and many other materials. Gravers or other carving tools are held in one of a variety of reciprocating impact handpieces (called Standard Handpieces and sold separately). The force of the impact is controlled by a foot pedal while the impact speed (400 to 8,000 strokes per minute) is governed by the front mounted dial adjustment on the control box. The engraved cuts and carved lines you make are identical to traditional hand techniques but are accomplished much more quickly and with far less effort.

Using a variety of tools, the impact handpieces also impart a hammering effect, so you can bezel and channel-set stones, inlay metal, repousse, and apply custom textures. Through its precision dual stage pressure regulator, GraverMax G8 provides the widest range of hammer power available: fine enough to set emeralds in gold safely and heavy enough to create deep textures in steel. All the while, your handpiece remains cool, because it is powered by air.

All air inlet and outlet connections are through quick-disconnect fittings. Compatible with all GRS Standard Handpieces and every existing GraverMax or GraverMate handpiece. Two handpieces may be connected simultaneously and are engaged individually by the handpiece selector knob. A third, auxiliary outlet with its own shut-off selector switch is provided for use with air-driven rotary handpieces. Requires 1.4 CFM of compressed air at @45 PSI minimum (40 liters per minute at 3 bar minimum). Measures 5.2" x 12" x 8.2" high. 100-240 volts, 50 / 60 cycles. Furnished with foot control, hoses, and air filter. A length of 1/4" flexible tubing for connection to your air source is also provided. Handpieces sold separately (see related products below). Made in USA.

Note: The GraverMax G8 requires dry, oil-free compressed air. Use with a compressor equipped with a coalescing filter that captures oil and moisture, or add this type of filter to your existing compressed air line.