There are no items
in
My Cart

GRS HSS QC Flat Gravers

GRS HSS QC Flat Gravers

High Speed Steel

GRS Quick Change (QC) Flat Gravers are designed to work with all GRS graver handles and power handpieces that use QC Tool Holders (see related products below). They can be shaped to suit specific needs and must be sharpened before use. Widths are approximate.

The Basics

  • Unless otherwise noted, all gravers come pre-shaped with a ground cutting face. Gravers must be sharpened before use. Sharpening can be done manually with a stone or automated with a motorized hone.
  • Flat Gravers have a flat cutting edge with either parallel or slightly tapered sides. They're useful for removing or texturing backgrounds, bright-cutting, block lettering, and cutting consistent width lines for borders.
  • High Speed Steel (HSS) gravers strike a balance between cost and durability. They maintain their hardness (temper) better than standard carbon steel and cost less than carbide.
  • GRS Quick Change (QC) gravers are shorter than standard gravers and feature smaller shanks. The shanks fit QC tool holders, which provide fast tool switching between GRS graver handles and power handpieces.
Item No. Image Size Width Price Qty
Add to Wishlist
253-036 GRS HSS QC Flat Graver, no. 36 no. 36 0. 2 mm (A)
$11.95
253-037 GRS HSS QC Flat Graver, no. 37 no. 37 0.4 mm (A)
$11.95
253-038 GRS HSS QC Flat Graver, no. 38 no. 38 0.6 mm (A)
$11.95
253-039 GRS HSS QC Flat Graver, no. 39 no. 39 0.8 mm (A)
$11.95
253-040 GRS HSS QC Flat Graver, no. 40 no. 40 1.0 mm (A)
$11.95
253-041 GRS HSS QC Flat Graver, no. 41 no. 41 1. 2 mm (A)
$11.95
253-042 GRS HSS QC Flat Graver, no. 42 no. 42 1.4 mm (A)
$11.95
253-043 GRS HSS QC Flat Graver, no. 43 no. 43 1.6 mm (A)
$11.95
253-044 GRS HSS QC Flat Graver, no. 44 no. 44 1.8 mm (A)
$11.95
253-045 GRS HSS QC Flat Graver, no. 45 no. 45 2.0 mm (A)
$11.95
253-047 GRS HSS QC Flat Graver, no. 47 no. 47 2.4 mm (A)
$11.95
253-049 GRS HSS QC Flat Graver, no. 49 no. 49 2.8 mm (A)
$11.95