Skip to Content
Free Shipping over X amount
GRS Standard Engraving Block Ball Vise
Item #
210-205-GRP
The crown of this extremely well made engraving ball vise from GRS rotates smoothly over roller bearings and the crown shaft turns within ball bearings to eliminate wear and loosening. Rotational resistance is adjustable for fine-tuning your work. The black, hardened steel vice jaws and satin finish of this block prevent glare and eyestrain. Heavy duty construction guarantees years of dependable service. At 20.9 lbs., it weighs 25% more than other blocks of comparable size. Furnished with a rubber pad, jaw plates, four 9/64" steel pins, and wrench. Shipping weight: 22 lbs. Made in USA.
Product Details
| Model | Scale | Diameter | Jaw Width | Max Opening | Height | Weight |
|---|---|---|---|---|---|---|
| MicroBlock |  |
80 mm (3.1") | 46 mm (1.8") | 50 mm (2") | 86 mm (3.375") | 4.35 lb (2 kg) |
| MicroBlock XL |  |
100 mm (3.9") | 46 mm (1.8") | 70 mm (2.75") | 97 mm (3.8") | 7 lb (3.1 kg) |
| Standard Block |  |
130 mm (5.125") | 63.5 mm (2.5") | 76 mm (3") | 152 mm (6") | 20.9 lb (9.5 kg) |
| MagnaBlock |  |
147 mm (5.8") | 89 mm (3.5") | 89 mm (3.5") | 184 mm (7.25") | 32.6 lb (14.8 kg) |
| Low Profile |  |
147 mm (5.8") | 89 mm (3.5") | 89 mm (3.5") | 146 mm (5.75") | 23.6 lb (10.7 kg) |
| Center Positioning |  |
180 mm (7") | 76 mm (3") | 89 mm (3.5") | 197 mm (7.75") | 42 lb (19 kg) |
-
GRS ID Ring Holder
Starting at $29.00
