There are no items
in
My Cart

GRS MagnaBlock Engraving Block Ball Vise

GRS MagnaBlock Engraving Block Ball Vise

with Attachment Set

The increased size and added weight of the GRS MagnaBlock ball vise provides extra support for your work. Weighing 30 lbs., this extra-heavy block delivers the stability you need when using power tools or chasing hammers. The crown rotates smoothly over roller bearings and the crown shaft turns within ball bearings to eliminate wear and loosening. Rotational resistance is adjustable for fine-tuning your work. All surfaces are specially finished for low glare to reduce eye strain. Vice jaws have replaceable threads. Every major part is machined from solid steel stock. Furnished with a rubber pad, jaw plates, 5 steel pins (four 9/64" pins and one 1/4" pin), and wrench. The included 30 piece attachment set adds a variety of pins and clamps to hold just about any item you might want to engrave (see related products below). Made in USA.

GRS Engraving Block Comparison

Block Scale Diameter Jaw Width Max Opening Height Weight
MicroBlock MicroBlock 80 mm
(3.1")
46 mm
(1.8")
50 mm
(2")
86 mm
(3.375")
4.35 lb
(2 kg)
MicroBlock XL MicroBlock XL 100 mm
(3.9")
46 mm
(1.8")
70 mm
(2.75")
97 mm
(3.8")
7 lb
(3.1 kg)
Standard Block Standard Block 130 mm
(5.125")
63.5 mm
(2.5")
76 mm
(3")
152 mm
(6")
20.9 lb
(9.5 kg)
MagnaBlock MagnaBlock 147 mm
(5.8")
89 mm
(3.5")
89 mm
(3.5")
184 mm
(7.25")
32.6 lb
(14.8 kg)
Low Profile Low Profile 147 mm
(5.8")
89 mm
(3.5")
89 mm
(3.5")
146 mm
(5.75")
23.6 lb
(10.7 kg)
Center Positioning Center Positioning 180 mm
(7")
76 mm
(3")
89 mm
(3.5")
197 mm
(7.75")
42 lb
(19 kg)
Item No. Price Qty
210-206
$830.00
Add to Wishlist