There are no items
in
My Cart

GRS C-Max Carbide Tapered Round Gravers

GRS C-Max Carbide Tapered Round Gravers

The GRS C-Max Tapered Round has angled sides that taper down to a rounded tool bottom. The 1/8" round shanks are perfectly sized to fit 1/8" round GRS QC Tool Holders for GRS graver handles and power handpieces (see related products below).

The Basics

  • Unless otherwise noted, all gravers come pre-shaped with a ground cutting face. Gravers must be sharpened before use. Sharpening can be done manually with a stone or automated with a motorized hone.
  • Round Gravers have a round cutting edge with either parallel or slightly tapered sides. They're used primarily for raising and rolling beads for stone setting or cutting smooth curves when engraving or chasing. Also known as a dotter when engraving letters.
  • GRS C-Max gravers are made from a specially formulated tungsten carbide alloy for a great blend of hardness and toughness. Although more brittle than other steel alloys, C-Max gravers stay sharp much longer.
Item No. Image No. Width Price Qty
Add to Wishlist
254-680 C-Max Carbide Tapered Round Graver, No 50 50 0.2 mm (A)
$19.50
254-681 C-Max Carbide Tapered Round Graver, No 51 51 0.4 mm (A)
$19.50
254-682 C-Max Carbide Tapered Round Graver, No 52 52 0.6 mm (A)
$19.50
254-683 C-Max Carbide Tapered Round Graver, No 53 53 0.8 mm (A)
$19.50
254-684 C-Max Carbide Tapered Round Graver, No 54 54 1.0 mm (A)
$19.50
254-685 C-Max Carbide Tapered Round Graver, No 55 55 1.2 mm (A)
$19.50
254-686 C-Max Carbide Tapered Round Graver, No 56 56 1.4 mm (A)
$19.50