There are no items
in
My Cart

GRS HSS Flat Graver Blanks

GRS HSS Flat Graver Blanks

Made from quality heat-treated high-speed steel stock with a nice utility ground finish that is straight and square. The pre-shaped blank gives you a head start when creating your own flat graver, while the un-shaped blanks can be custom ground to any shape you want. All blanks are 2.5″ (63.5 mm) long overall and must be shaped and sharpened before use. For a handle, we recommend the GRS Quick Change Manual Graver Handle with an appropriately sized tool holder(see related products below). Made in USA.

The Basics

  • Unless otherwise noted, all gravers come pre-shaped with a ground cutting face. Gravers must be sharpened before use. Sharpening can be done manually with a stone or automated with a motorized hone.
  • Flat Gravers have a flat cutting edge with either parallel or slightly tapered sides. They're useful for removing or texturing backgrounds, bright-cutting, block lettering, and cutting consistent width lines for borders.
  • High Speed Steel (HSS) gravers strike a balance between cost and durability. They maintain their hardness (temper) better than standard carbon steel and cost less than carbide.
Item No. Description Dimensions Price Qty
Add to Wishlist
252-669 Pre-shaped flat graver blank 2 x 2 mm
$9.85
252-667 Square stock graver blank 2 x 2 mm
$9.00
252-670 Square stock graver blank 3.2 x 3.2 mm
$12.10