Free Shipping over X amount

Lindström 80 Series Micro-Bevel & Flush Cutters

Lindström 80 Series Micro-Bevel & Flush Cutters

Item #
368-140-GRP

The 80 Series Lindström Diagonal Cutters are among the highest quality cutters available to jewelers. Forged from high-grade steel with CNC-machined cutting edges, induction hardened to HRC 63-65, these cutters feature a precision lap joint secured by Lindström's innovative combination screw and nut. (see related products below) The handles are covered with comfortable ESD-safe plastic and include dual leaf springs. The high quality materials and engineering know-how ensure perfectly aligned cutting edges and long tool life.

Grouped product items Grouped product items
Item # No. Capacity Cut Length Price Qty
368-140
8140 (small) 1.25 mm copper Micro-Bevel 10 mm cut
(110 mm overall)
$49.70
each
  • $47.22 (3 or more)
  • $46.22 (6 or more)
+
368-141
8141 (small) 1.25 mm copper Flush 10 mm cut
(110 mm overall)
$49.35
each
  • $45.40 (3 or more)
  • $44.42 (6 or more)
+
368-142
8142

(small)

1 mm

copper

Ultra-

Flush

10 mm cut

(110 mm overall)

$53.13
each
  • $50.47 (3 or more)
  • $49.41 (6 or more)
+
368-150
8150

(medium)

1.6 mm

copper

Micro-Bevel 12.5 mm cut

(112.5 mm overall)

$50.87
each
  • $48.33 (3 or more)
  • $47.31 (6 or more)
+
368-151
8151

(medium)

1.6 mm

copper

Flush 12.5 mm cut

(112.5 mm overall)

$51.68
each
  • $49.10 (3 or more)
  • $48.06 (6 or more)
+
368-152
8152

(medium)

1.25 mm

copper

Ultra-

Flush

12.5 mm cut

(112.5 mm overall)

$57.31
each
  • $50.41 (3 or more)
  • $49.35 (6 or more)
+
368-160
8160

(large)

2 mm

copper

Micro-Bevel 16 mm cut

(125 mm overall)

$46.55
each
  • $44.22 (3 or more)
  • $43.29 (6 or more)
+
368-161
8161

(large)

2 mm

copper

Flush 16 mm cut

(125 mm overall)

$57.31
each
  • $54.44 (3 or more)
  • $53.30 (6 or more)
+
368-162
8162

(large)

1.6 mm

copper

Ultra-

Flush

16 mm cut

(125 mm overall)

$65.55
each
  • $62.27 (3 or more)
  • $60.96 (6 or more)
+

Product Details

  • Micro-Bevel Cut Designed by Lindstrom to leave the lead end of the cut wire with a smaller surface area and flatter profile than Semi-Flush Cutters. The outside of the wire is "pinched" by the cutter, leaving a much smaller bevel. This design also gives the cutter a greater cutting range.
  • Flush Cut Produces a cut profile similar to the Micro-Bevel, but with a less pronounced bevel and flatter surface. The edges of the cut wire are "pinched", leaving a very narrow, short bevel in the center.
  • Ultra-Flush Cut The precisely aligned and specially designed radii of the cutting edges produce a lead end that is almost entirely flat, with a barely discernable separating line. The ony trade-off is a more limited cutting range.