There are no items
in
My Cart

Muller Carbon Steel Flat Gravers

Muller Carbon Steel Flat Gravers

E.C. Muller Flat Gravers are made from high-grade carbon steel and pre-tempered for use on non-ferrous metals. They can be shaped to suit specific needs and must be sharpened before use. All gravers are 4-1/2" long. Widths are approximate. Made in USA.

The Basics

  • Flat Gravers have a flat cutting edge with either parallel or slightly tapered sides. They're useful for removing or texturing backgrounds, bright-cutting, block lettering, and cutting consistent width lines for borders.
  • Carbon Steel gravers are economically priced. They cut precisely when new, but don't retain their sharpness as long as other steel alloys.
Item No. Image No. Width Price Qty
Add to Wishlist
251-536 Flat Graver, carbon No. 36 36 0. 2 mm
$6.23
251-537 Flat Graver, carbon No. 37 37 0.4 mm
$6.23
251-538 Flat Graver, carbon No. 38 38 0.6 mm
$6.23
251-539 Flat Graver, carbon No. 39 39 0.8 mm
$6.23
251-540 Flat Graver, carbon No. 40 40 1.0 mm
$6.23
251-541 Flat Graver, carbon No. 41 41 1. 2 mm
$6.23
251-542 Flat Graver, carbon No. 42 42 1.4 mm
$6.23
251-543 Flat Graver, carbon No. 43 43 1.6 mm
$6.23

251-545 Flat Graver, carbon No. 45 45 2.0 mm
$6.23
251-546 Flat Graver, carbon No. 46 46 2.6 mm
$6.23
251-547 Flat Graver, carbon No. 47 47 3.0 mm
$6.23
251-548 Flat Graver, carbon No. 48 48 3.4 mm
$6.43
251-549 Flat Graver, carbon No. 49 49 3.8 mm
$6.43