There are no items
in
My Cart

GRS HSS QC Round Gravers

GRS HSS QC Round Gravers

High Speed Steel

GRS Quick Change (QC) Round Gravers are designed to work with all GRS graver handles and power handpieces that use QC Tool Holders (see related products below). They can be shaped to suit specific needs and must be sharpened before use. Widths are approximate.

The Basics

  • Unless otherwise noted, all gravers come pre-shaped with a ground cutting face. Gravers must be sharpened before use. Sharpening can be done manually with a stone or automated with a motorized hone.
  • Round Gravers have a round cutting edge with either parallel or slightly tapered sides. They're used primarily for raising and rolling beads for stone setting or cutting smooth curves when engraving or chasing. Also known as a dotter when engraving letters.
  • High Speed Steel (HSS) gravers strike a balance between cost and durability. They maintain their hardness (temper) better than standard carbon steel and cost less than carbide.
  • GRS Quick Change (QC) gravers are shorter than standard gravers and feature smaller shanks. The shanks fit QC tool holders, which provide fast tool switching between GRS graver handles and power handpieces.
Item No. Image Size Width Price Qty
Add to Wishlist
253-050 GRS HSS QC Round Graver, no.50 no. 50 0. 2 mm (A)
$11.95
253-051 GRS HSS QC Round Graver, no.51 no. 51 0.4 mm (A)
$11.95
253-052 GRS HSS QC Round Graver, no.52 no. 52 0.6 mm (A)
$11.95
253-053 GRS HSS QC Round Graver, no.53 no. 53 0.8 mm (A)
$11.95
253-054 GRS HSS QC Round Graver, no.54 no. 54 1.0 mm (A)
$11.95
253-055 GRS HSS QC Round Graver, no.55 no. 55 1. 2 mm (A)
$11.95
253-056 GRS HSS QC Round Graver, no.56 no. 56 1.4 mm (A)
$11.95
253-057 GRS HSS QC Round Graver, no.57 no. 57 1.6 mm (A)
$11.95