Compare Dapping Set Sizes
The table below shows the difference in sizes of each of the Dapping Punch Sets we sell. The illustrations display the smallest and largest punches in each set. The sets are organized according to the largest dapping punch size in each set, with the smallest at the top of the table.
Item No. | Punch Sizes | No. Punches | Block/Cube | |
![]() 190-240 |
![]() |
2.3 to 25 mm (1/16" to 1") |
24 Punches | Dapping Cube |
![]() 190-242 |
![]() |
2.3 to 25 mm (1/16" to 1") |
24 Punches | Dapping Cube |
![]() 190-241 |
![]() |
6 to 28 mm (1/4" to 1-1/8") |
8 Punches | Flat Dapping Die |
![]() 190-305 |
![]() |
3 to 30 mm (1/8" to 1-1/8") |
21 Punches + Forming Tools | Dapping Cube, 2 Forming Dies + Mini Anvil |
![]() 190-132 |
![]() |
28 to 45 mm (1-1/8" to 1-3/4") |
5 Punches | No |
![]() 190-243 |
![]() |
2 to 50 mm (1/16" to 2") |
26 Punches | Dapping Cube |
![]() 190-249 |
![]() |
40 to 50 mm (1-5/8" to 2") |
3 Punches | Flat Dapping Die |
![]() 190-190 |
![]() |
32 to 63 mm (1-1/4" to 2-1/2") |
6 Punches | 3 (2-Sided) Dies |
![]() 190-250 |
![]() |
31.5 to 64.5 mm (1-1/4" to 2-1/2") |
6 Punches | Dapping Cube |