There are no items
My Cart

Dust Collector with or without Polishing Motor

Dust Collector with or without Polishing Motor


Unlike most other table-top dust collectors, this model from Pepe has 2 blowers instead of 1 blower. This arrangement permits the dedication of one blower per air inlet, which in turn allows each blower to be sealed off from the other as well as from the remaining space inside the dust collector (see photo). The result is a significant improvement in air movement efficiency versus other dust collectors. Each blower moves air at the rate of 250 cfm (500 total cfm), and has its own dedicated filter. Each filter is housed within a cassette that slides out of the top of the machine, eliminating the need to dismantle the dust collector to replace a filter. Fabricated from 18 gauge steel with a baked-on blue finish, the dust collector also features two ceramic light sockets with 60 watt bulbs and a top-mounted accessory shelf for storing buffs and compounds. Equipped with a 1/3HP double spindle polishing motor with 1/2" shafts and two 5" tapered spindles. A 2" high riser is provided for the polishing motor.

The dust collector can be purchased without the polishing motor though with the 2" high riser. If the dust collector is used without the polishing motor shown, the pan is stamped with holes to accept a wide variety of other polishing motor models. Other polishing motors like the Baldor and Handler sealed motors are installed into the pan of the dust collector without the riser and do not need to be bolted to the dust collector. Dimensions: 33" wide by 22" deep by 11" high. Accessory shelf adds another 9" to the overall height. Item 310-745 is shipped in 2 boxes. 110 volts. Made in USA.

Item No. Image Description Price Qty
Add to Wishlist
310-745 Double Spindle Polishing Unit Dust collector & 1/3 HP Polishing Motor
310-744 Dust Collector with Riser Dust collector only but with riser