There are no items
in
My Cart

1/8" to 1" Pepetools Disc Cutter Set

1/8" to 1" Pepetools Disc Cutter Set

Model 196.10A

Available again after a long absence, the Pepetools Combination Disc Cutter is redesigned to incorporate more features and the price is still the same. Fashioned from select grades of steel, the Pepe Combination Disc Cutter produces perfect circles from non-ferrous metals as thick as 18 gauge and from stainless steel as thick as 22 gauge. Precision ground and hardened punches are machined to the strictest tolerances to insure perfect cuts and for endurance. The cutting end of each of the 14 punches is machined to a 7° angle: a characteristic of all premium disc cutters. This angle greatly facilitates the shearing action of each punch. Hardened dowels press-fitted into the lower plate of the unit keep the 2 plates in alignment. Each punch has a striking end a little smaller in diameter than the cutting end to facilitate removal of the punch after forming a disc. The upper plate of the disc cutter is laser engraved with the punch sizes in millimeters and inches. The metal being worked is clamped in place by simply turning the knob in the center of the upper guide plate. Fourteen punches in the following sizes are included:

  • Inch sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1"
  • Millimeter sizes: 3, 4.75, 6.35, 8, 9.5, 11, 12.7, 14.3, 16, 17, 19, 20.6, 22, 25

The entire apparatus is stored on a machined aluminum base measuring 4" x 5" x 5/8". The Pepetools Combination Disc Cutter comes with a one-year manufacturer's warranty and is now made in USA. Shipping weight 7 lbs.

For a limited time, receive a free set of Center Positioning Dies (for cutting washers), a Red Urethane Cutting pad and a free tube of PepeLube Cutting Lubricant, a $60.00 value. (see related products below)

Item No. Price Qty
190-010
$189.00
Add to Wishlist